With the mechanical part of the RepRap largely completed, the next step was to wire up the electronics.
I had underestimated the amount of wiring required for the printer, so I braided the wire before wrapping it around the printer’s frame in an attempt to keep it as neat as possible. The wires have to be kept away from many moving parts, hot points, etc. Keeping them isolated should also minimise any cross-talk noise between the large lengths of cable. However, as the printer is going to have to be disassembled, packed and moved in the near future, I haven’t fixed the wires up with cable-ties yet.
The Danguinololu successfully communicated motor and temperature signals so everything seems in order, except for the extruder motor which is behaving in an irrational manner and only intermittently accepting movement signals in one direction. Leaving this problem aside, I moved on to testing the heated extruder tip.
The heated tip temperature was incremented in steps up to 210 °C, while manually feeding some PLA plastic into the extruder. The plastic flows out of the tip effortlessly at around 200 °C, so things are looking positive for the extruder assembly! The remaining step is to calibrate a working motor to extrude plastic at the right speed for printing.
As I’m experiencing some issues with one of the motors, unfortunately the long-awaited calibration and test-printing stage has to wait!